3L 5L 10L Pure Water Bottle Filling Machine Power 4.18 KW Air Supply Pressure 0.7MPa

3L 5L 10L Bottle Pure Mineral Water Bottling Machine Filling Line

Introduction

XGF series 3-in-1 filling monoblock, combined with bottle rinsing, filling and capping. It is innovated and designed in the requirement of still water, pure water, RO water, mineral water, sparkling water, etc. in barrels (mainly can be from 3L to 10L) on the bases of introducing, digesting and absorbing advanced technology from Germany and Italy.

Main features

1). Rinsing machine

The rinsing machine connect with empty bottle conveyor frame, when empty bottle input rinsing machine extent, through photoelectrical reaction, Circuit control system command Pneumatic electromagnetic valve movements, let the Clip bottles of cylinder clip the bottle, then the overturn cylinder operate, the bottleneck turn down, then the pure water pump open, spurt pure water to the bottle, after 30s, stop it, the overturn cylinders reset, input the conveyor system and go to filling machine.

2). Filling machine

After-wash empty bottle input the filling machine through conveyor system, two push-barrel cylinders operate beside conveyor, then the bottle arrive filling part, the bottle bottom separate the conveyor belt. After filling, the bottle drop on the conveyor belt. Output to the capping part.

3). Screw capping machine

The screw capping machine is made of screw capping heads frame, after the filled bottle convey to the screw capping machine station, through air cylinder start to screw cap, again and again, the finished bottle output to the warehouse and check.

Main Specification

Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang

Technical Parameters

Welcome your inquiry !